Turbo Flow WSD 300-800 Series single stage double suction pumps are designed for public works, industrial and marine pumping. WSD 300-800 Series pumps are rated for medium duty applications with performance up to 5,700 GPM (1296 m3/hr). Click on the tabs above to get more information on this single stage double suction series. The model shown here includes an optional control panel and an engine driven configuration.

WSD 2000-3200 Specifications

Max. Capacity: 61,394 GPM (13,994 m3/hr)
Max. Head: 817 Ft. (122 m)
Max. Working Pressure: 200 PSI (1379 kPa)
Max. Temperature: 250°F (135 °C)
Max. Discharge Flange Connection: 32 in. (NPS) (800 mm)
Max. Motor Power: 4,635 HP (3,456 kW)

1. Bearing Protection: Improved bearing life and reduced bearing contamination

2. Premium Bearings: Minimum bearing life of 1000 hours with proper maintenance.

3. Positive Seals: Positive shaft sealing from impeller and sleeves at all operating conditions.

4. Stuffing Box: A wide variety of mechanical seals are available for your application.
Packing is available on WSD Series models.

5. Mechanical Seals: Mechanical seals are designed for specific municipal and industrial applications.

6. Severe Duty Shafts: Designed for minimum deflection and improved seal and bearing life.

7. Flushing Lubricator System: Lubricates and flushes the mechanical seal and/ or packing.

8. Pump Casing: Heavy duty pump casing allows for removal of rotating element without disturbing piping or driver.

9. Impeller: Dynamic balancing improves performance and extends pump life.

10. Premium Design: Turbo Flow Split Case Pumps are designed for quiet pumping and easily accommodate periodic changes in operating levels.

11. Turbo Flow Thrust Bearings: Wastecorp's thrust bearings allow for high axial thrust and are locked to the shaft.

12. Renewable Casing Wear Rings: Turbo Flow casing wear rings are locked in place during operation to improve efficiency and prevent rotation.

Download the WSD Series brochure