Two Inch Diaphragm Pump

Documents

Specifications


	2FA-M™ Series

Max. Pump Performance Range
Capacity (GPM)	20
Suction Lift - Vertical (ft)	20
Suction Lift - Horizontal (ft)	75
Total Discharge Head - Vertical (ft)	50
Total Discharge Head - Horizontal (ft)	300
Solids Handling/Particle Size (inch)	1.25
Suspended Solids By Volume	50%
Continuous Liquid Temperature	140°F
Connection Size (inch)	1.5" or 2" FNPT (your choice)
Standard Connection Type	Threaded FNPT
No. of Diaphragms	Single
Materials of Construction
Diaphragm Size (inch)	7" OD
Diaphragm	Blended Rubber with Fabric Reinforcement
Flapper Check Valves	Reinforced Viton
Clamping Plates	Steel
Pump Body	Aluminum
Bearing	Cam Follower
Crankarm	Steel
Inlet/Outlet Flanges	Aluminum
Check Valve Seat	Aluminum
Pump Rod	Steel
Gaskets	Neo-Nylon
Lubrication	Alemite Grease Fitting
Base	Aluminum
Engine Options
Constant Speed Gear Reducer	Siemens, SEW Eurodrive or Equal
Gasoline Engine	3 hp Manual Start (Honda GX 100 or Equivalent)
Diesel Engine	4.6 hp Electric Start (Hatz 1B20 or Equivalent)
Additional Information
Approx. Pump Weight	95 lb [43 kg]
Approx. Pump Dimensions (inches)	24 x 16 x 15 (LxWxH)
Approx. Pump Dimensions (cm)	63.5 x 40.6 x 38 (LxWxH)

			Standard model Featuring single phase or three phase motors. Heavy duty Siemens or SEW Eurodrive gear box.
			Wheel kit The heavy duty wheel kit helps you maneuver your 2FA-EC anywhere with a heavy duty frame.
			Pump Out System A complete pump out system designed specifically for marinas learn more
			Water trailer or Honey Wagon The 2FA-M is available in a water trailer configuration or honey wagon septic pump system learn more
			Disaster Management Pump Systems Designed for oil spills, floods, overflowing sewers and more. Includes a fresh water pump system.


			1. Pump Body The Mud Sucker pump body makes all the difference. We design all FA Series with a body designed to move tough fluids without clogging.
			2. Heavy Duty Engine Heavy duty 3 hp Honda GX Series gas engine with manual start.
			3. Diaphragm Heavy duty 7" OD rubber/nylon blended diaphragm to pump tough slurry and fluids.
			4. Heavy Duty Castings Make no mistake, all pumps are not made alike. Mud Sucker castings are made of premium marine grade aluminum for high use environments not to be confused with throw away makes.
			Optional Pressure Relief Valve We highly recommend that you specify your new Mud Sucker 2FA with an optional pressure relief valve system. This helps to prevent damage to your pump in the event of a closed valve in your system and an emergency shut down.

	Optional Add-On Hosing & Fittings	Part Number
	Camlock Adapters, Male (Part F)	60462-00
	Clear Swing Check Valve, 2” FNPT	60536-00
	Discharge Layflat Hose (Blue), Part C&E Camlocks, 2” x 50ft length (PN: )	51333-00
	Non-Collapsible EPDM (Grn/Blk) Hose, Part C&KC Camlocks, 2” x 20ft length	60718-00
	Strainer, Sq Hole (Solids), 2” FNPT	34383-00
	Strainer, Rd Hole (Non-Clog), 2” FNPT	60583-00
	Optional Electrical Components
	Variable Frequency Drive with Keypad mounted directly on gearmotor (1HP; 3 Phase Only)	Call
	Manual Push Starter in NEMA 12 Enclosure with motor protection & pigtail	61492-00
	Manual Push E-Stop Button Starter in NEMA 12 enclosure with overload contactor, transformer & pigtail	61491-00
	Optional Spare Parts Kits
	Flapper Valve Assembly	Call
	Basic Spare Parts Kit (Diaphragm & Flappers Only)	61285-00
	Comprehensive Spare Parts Kit (Diaphragm, Flappers, Weights and Hardware)	61284-00
	Wheel mount kit with handles	61315-00

Overall Rating

5/5

Re: Multi Purpose Mud Suckers

Ptek

From:

Salisbury, NC

Application:

Process Pumping

Average GPM:

20

Our Mud Sucker 2FA-M fleet are being used on site at our alumnium refinery for a process application. These Mud Sucker's pump from the bottom of one tank to the top of the process tank, they do a great job for our facility.

5/5

Working this Mud Sucker hard

FMBY

From:

Brownwood, TX

Application:

Sump pits, etc

Average GPM:

10-20

Have not had any problems with this 2FA-M. We bought it two years ago. Using it all around our farm for manure pit pumping, septic tanks and flood dewatering. I should have got the wheel kit for it is my only beef.

5/5

USMC11

From:

Bridgeport, CA

Application:

General wastewater

Average GPM:

15

Bought for military base. Used daily for yellow grease pumping from mess halls and works great.

Share this information:

Do you own a Mud Sucker 2FA-M Series? Rate this pump for your application.