Mud SuckerĀ® 3B-ECā„¢

3" Pro Series Electric Diaphragm Pump

Pump up to 80 GPM with the electric driven Pro Series Mud Sucker 3B-EC. Using check ball technology to manage the toughest waste pumping jobs.  Select from single phase, three phase and explosion proof drives. 50 Hz and 60 Hz configurations available

  • Pump up to 80 GPM
  • Max. solids to 2.25"
  • 3" connection
  • Select from inline or standard piping options
  • Heavy duty ball valve design 


CHECK BALL TECHNOLOGY

Mud Sucker Pro Series air driven diaphragm pumps use check ball technology in the suction and discharge valve chambers to pump slurries, abrasive fluids, solids and general wastewater. Access to both the suction and discharge areas is available within seconds.

ELECTRIC DIAPHRAGM PUMP PROTECTION

The Mud Sucker 3B-EC includes a standard emergency pressure relief valve. Since a diaphragm pump is also a positive displacement pump, a pressure relief valve reduces the chances of damage in an over pressurization event.

EXCLUSIVE CONTOURED VELOCITY CHANNEL

The only diaphragm pump in the industry with an exclusive pump body designed to enhance the flow of slurries and debris laden liquids to prevent clogs.

SANTOPRENEĀ® DIAPHRAGMS

These heavy duty diaphragms are tear resistant and are specially formulated to pump waste oils, municipal sewage and petroleum based products.

HEAVY DUTY PUMP ROD

When pumping tough liquids, the Mud Sucker pump rod enhances productivity with heavy duty engineering to outlast other makes.

MUD SUCKER OPERATOR SAFETY

Ships complete with safety guards. Pump operator does not come into contact with moving components when guards are in place (removed in illustration above for clarity).

MUD SUCKER SPARE PARTS KITS

Genuine OEM Mud Sucker Pro Series electric diaphragm pump spare parts kits are available same day (in select areas) or next day service if required.

Energy Costs Savings

View Wastecorp's study comparing relative energy consumption costs of diaphragm pumps.

Standard Features

Standard Connection Type
MNPT
Standard Piping Configuration
Perpendicular

Optional Features

Optional Piping Configuration
Inline (63831-XX)

Pump Specifications

Approx. Pump Operating Speed
60 RPM
Ball Valves
4.5" Dia. Urethane with Steel Core
Gear Reducer
Siemens or SEW Eurodrive
Max. Discharge Head
22 psi
Max. Flow Capacity
80 GPM
Max. Liquid Temperature
140Ā°F (60Ā°C) continuous
Max. Suction Lift
20' Vertical or 75' Horizontal
Power Transmission
3HP 3Ph TEFC Motor
Solids Handling
2.25" Dia. or 50% by Volume
Suction/Discharge Size
3"

Materials of Construction

Crankarm
AISI 1045 HR Steel
Diaphragm
13"
Pump Castings
Cast Iron (ASTM A48; Class 30)
Pump Rod
AISI 12L14 Carbon Steel
Get A Quote

Get A Quote



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.