This unique design allows precise adjustment of impeller
to wear ring tolerance. The external jack screws allow
the carrier to shift and lock in any predetermined
horizontal direction. This design reduces
maintenance costs and can improve overall pump
efficiency without shimming or wear plate replacement.

Unique Axial Rib Design

Axial ribs located on the inner stuffing box, prevent
entrapment of solids and vapor near the mechanical
seal. This feature improves flow within the chamber
and eliminates dry running failure, resulting in extended
pump and seal life.

Solids Handling Impeller

Concentrically designed and computer balanced impellers
are engineered to pass solids in excess of 50% of the
inlet hole. A variety of chopper and high efficiency
impellers are also available to meet your specific
requirements.

Enlarged Bearing Housing

The oversized bearing housing gives unsurpassed shaft
support, reducing roller bearing fatigue. It is equipped
with well positioned drain points and oiler connection,
in addition to a unique domed sight glass that permits
visual observation of the oil level in the casing.

Rear Pump Out Vanes

Rear pump out vanes greatly reduce axial thrust and
pressure on seal and bearings, resulting in a virtual
elimination of radial loads, which effectively increases
pump performance and overall efficiency.

Quick Clean Design

The back-pull design allows for removal of full rotation
assembly without disturbing plumbing. It also permits
replacement of wear plate and access for casing
inspection.

Enlarged Clean Out Port

Large sized cleanout holes allow for inspection of inner
casing by a simple twist of the hand knobs (no special
tools required).

Corrosion Resistant Roller Bearings

The oversized ball bearings are oil lubricated, requiring
no external cooling and are designed to operate for a
MINIMUM of 120,000 hours without replacement.

Replaceable Suction Flapper

The heavy duty flapper valve is easily accessible for
general inspection, without the need for special tooling
or pipe disruption, through the twist of hand knobs.

Flanged Gauge Connections

Standard gauge connections in accordance with ANSI
standards allow for recording and monitoring suction
and discharge pressures with the use of Wastecorp's
selection of optional Ashcroft® Pressure Gauges.

Corrosion Resistant Casing

All Trash-Flow® pumps are designed with thick walled
casings to withstand abrasive sludge and slurries. Most
models are available in a variety of castable materials,
although generally supplied in cast and ductile iron.